On the web interface of CM in version 6 under the server role section. I see a number for MID. this looks like it matches what my network region number is for this LSP. on the network config section under Server ID I see another number. Do these have to match. What is the relevance of each? I'm having issues with file sync from the main and all the addresses are correct for the call servers. So, I'm wondering if those fields are not correct for some reason.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MID and Server ID
- Thread starter wpetilli
- Start date
AvayaTier3
Technical User
The old SID/MID was for cm5 and earlier and licensing was installed separately on each server
licensing and authentication comes from Avaya RFA.
Using WebLM / System Platform etc. changed licensing to new scheme.
SID/MID are always 1 - licensing and authenticaion for all, uses WebLM and Avaya PLDS.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
licensing and authentication comes from Avaya RFA.
Using WebLM / System Platform etc. changed licensing to new scheme.
SID/MID are always 1 - licensing and authenticaion for all, uses WebLM and Avaya PLDS.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
- Thread starter
- #4
AvayaTier3
Technical User
Main SID 1 MID 1 The LSP MID's will not be "1"
They will match your programming on Cluster ID/MID for each survivable-processor when you add them in
the Main CM SAT.
In each LSP "statuslicense -v" will give you SID 1 and MID x
you can map the LSP's back to the survivable-processors
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
They will match your programming on Cluster ID/MID for each survivable-processor when you add them in
the Main CM SAT.
In each LSP "statuslicense -v" will give you SID 1 and MID x
you can map the LSP's back to the survivable-processors
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
So is there any consistency between which LSP's are sync'd versus the ones that aren't? My MID's don't follow any discernable pattern they are however all unique. If you have any LSP's that do not have an SID or have a duplicated MID maybe that is where the issue is.
If by ethernet tab you are referring to the Network Configuration page my SID is 1 as I don't believe this has much to do with translation sync.
All I know is we had a couple of LSP's that still had a Default MID of 1 and no SID when the system was installed and once we changed these so that the SID was consistent with the main site and the MID was unique, translations began to sync.
If by ethernet tab you are referring to the Network Configuration page my SID is 1 as I don't believe this has much to do with translation sync.
All I know is we had a couple of LSP's that still had a Default MID of 1 and no SID when the system was installed and once we changed these so that the SID was consistent with the main site and the MID was unique, translations began to sync.
- Status
Similar threads
- Locked
- Question
- Question