Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MICS VOIP

Status
Not open for further replies.
nadamson

nadamson

IS-IT--Management
Dec 26, 2004
50
GB
Is it possible to connect a MICS to VOIP lines ???. I have seen "boxes" you connect to you router that give you a standard telephone socket, you simply plug a "normal" phone into these sockets. I was wondering if you could wire these sockets into an analogue line card ?
 
Sort by date Sort by votes
they make Gateway boxes if this is what you are referring to... Its called a 4 port Voip Gateway. It interfaces with the analog lines in the MICS/CICS and uses DNIS digits route the call.

NTL555
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
1K
curlycord
curlycord
Don W
  • Locked
  • Question
Mics software upgrade tools
Replies
9
Views
644
curlycord
curlycord
jsaad
  • Locked
  • Question
MICS GATC going dead 4
2
Replies
24
Views
1K
curlycord
curlycord
Michael OConnor
  • Locked
  • Question
Norstar MICS Extension Call Forward External 4
Replies
12
Views
764
ttEstiNg2023
ttEstiNg2023
N
  • Locked
  • Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider 1
Replies
6
Views
1K
Nortel dino
N

Part and Inventory Search

Sponsor

Back
Top