MICS 7.1 PRI hunt group night service

[mode1]

I just upgraded customer to MICS 7.1 with PRI. Programmed target lines to ring a hunt group then programmed the hunt group to apear on three phones. Everything is working except when I hit night serrvice it plays the person is not available then goes to auto attendant greeting/
Please HELP?

 

[hawks]

What do you want it to do when you go into Night Service?

 

[mode1]

Night message

 

[curlycord]

How did you setup/program your night service?
Ringing set should be told to call the DN of the voice mail system (F985 to see)
Add the Target line/s to Ring Group.

Make sure no phones that are told to ring in day are doing any kind of forwarding etc.

________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[mode1]

Defaulted voice mail and re-programmed now everything is working. Thanks for the replies