MIB/OID Cisco 8xx series

[rizzah1977]

Hi,

I have used GetIf and walked over my cisco 8xx router with all the mibs. I think i found what i am looking for .. alltho im not sure. I wanted to catch the collisions on the Eth0 interface and the interface resets on the Eth0 interface. I found the following with GetIf:
------
.iso.org.dod.internet.private.enterprises.cisco.local.linterfaces.lifTable.lifEntry.locIfInCRC

with oid : .1.3.6.1.4.1.9.2.2.1.1.12
------
and
------
.iso.org.dod.internet.private.enterprises.cisco.local.linterfaces.lifTable.lifEntry.locIfResets

wit oid : .1.3.6.1.4.1.9.2.2.1.1.17
------

When i try to use this oid in PRTG i get an error. So its not working. I am probably doing something wrong here, im just not sure what.

Maybe im even looking in the whole wrong direction here .. so any imput would be very welcome!

thank you in advance.

 

[castlesmadeofsand]

router>en
router#sh int e0
This I believe will give you what you seek.

Tim

 

[rizzah1977]

thats correct, and now i would like to get the correct oid for those counters so i can monitor them (in my case) with PRTG.