Mexico Install

[TDMorIP]

I have to install a system in Juarez Mexico for a client I have in NYC. They will be getting an IP500 at 5.0 with an E1 and all 5410s. I believe they are on the same power as the US but I wanted to see if there is something I am missing as to the ease of installation for a Mexican site.

BTW, are E1s as easy to install as a PRI? Will standard Anaolg Trunk 4s work with the local carriers?

 

[amriddle01]

You sure they are getting an E1, that's a european thing, but it's even easier than T1 (they are both PRI)

ACSS Small and Medium Enterprise (SME) Communications

"What the Crocodile Hat....was that?

 

[TDMorIP]

AT&T is telling me its an E-1.

 

[amriddle01]

Probably is, just with America being T1 I would have thought Mexico would be the same, remember E1 is 30 channels not 24 so you will need more licences to achieve a full pipe

ACSS Small and Medium Enterprise (SME) Communications

"What the Crocodile Hat....was that?

 

[intrigrant]

E1 is very easy, just a few parameters and your done.

___________________________
Call Avaya, costs only €400 per hour, you must buy at least five hours.
But then you can talk to a REAL expert....
Now that is what i call support.

 

[IPOpotamus]

happy to help you with E1 and E1 R2 (the older school) since its the majority of our deployments.

 

[Westi]

the locale settings should take care of a lot of your problems if you set it to Mexico (make sure you have a dictionary at hand for programming then ) the analog lines will adapt to the local requirements and E1 or T1 is no big difference.

Joe W.

FHandw., ACSS

insanity is just a state of mind

 

[CarGoSki]

Hope you get hazardous duty pay and a bodyguard or a weapon. Them peeps are crazy in that town.

It's people like you who generalize.