Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Melco Help!
- Thread starter Duaneness
- Start date
- Thread starter
- #3
- Thread starter
- #4
Is this the analog recorder interface or some other type (digital)? Using the analog interface you bridge all the ports you want to record on the Meclo unit. There is a tip and ring input you access, dial tge appropriate port you wish to monitor and away you go. The analog ports are bridged and if you want access I usually put the monitor as a trunk on a CO board. Set the COR to allow only the people that need access.
I have only delt with the analog Melco units. Hope this helps
Thanks
Chris
I have only delt with the analog Melco units. Hope this helps
Thanks
Chris
- Thread starter
- #6
- Status
Similar threads
