Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Medpro and Trunk Groups 1
- Thread starter DPhil
- Start date
-
1
- #2
There is no real defined association. It all goes back to the network regions..
On your signaling gropu you put a near end clan node, and the far-end network region.. Whatever those parameters are matches it up with MedPro resources..
Medpros can be shared among many/all network regions if you chose.
BuckWeet
On your signaling gropu you put a near end clan node, and the far-end network region.. Whatever those parameters are matches it up with MedPro resources..
Medpros can be shared among many/all network regions if you chose.
BuckWeet
- Thread starter
- #3
You need to match up the node on the signaling group and the far end region (if used, this field can be blank, when blank it'll use the settings from the CLAN)
then match the network-region the CLAN's are in via the ip-interface form..
BuckWeet
then match the network-region the CLAN's are in via the ip-interface form..
BuckWeet
- Status