Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MD110 Asterix PRI QSIG

Status
Not open for further replies.
svetlio10

svetlio10

Technical User
Joined
Jul 13, 2012
Messages
4
Location
BG
I conect MD110 and Asterix via OpenVox BE200P PRI card and use QSIG cofiguration. Conection is OK, but ther is "click"(noise, disturbance) like a clok in speesh tract.
Can any help me?
 
Sort by date Sort by votes
I'm sorry..... I use OpenVox BE200P BRI card
 
Upvote 0 Downvote
What alarms do you have?
 
Upvote 0 Downvote
Who (MD or Asterix) is sync'ing from the public network?
Check with SCEXP or set it up with SCEXI.

///doktor
 
Upvote 0 Downvote
I dont hawe any alarms......only ther is "clickin"...or "ticking" (i dont knaw haw describe it) in spiking trakt
about syncing MD take sync from PSTN
 
Upvote 0 Downvote
The problem was in Asterx PBX driver for BRI cart, it must be forset in TE mode. But jumper on bord on card must be in NT. Idont have any idea whay, but in this way its working.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Ozphonebloke
  • Locked
  • Question Question
Md110 version
Replies
4
Views
902
Ozphonebloke
Ozphonebloke
Vivek1666
  • Locked
  • Question Question
Ericsson Md110 is restarting again
Replies
2
Views
816
Vivek1666
Vivek1666
smackred
  • Locked
  • Question Question
winfiol for aastra/ericson MD110
Replies
7
Views
1K
inlsp05
inlsp05
Ozphonebloke
  • Locked
  • Question Question
MD110 - ESU Backup
Replies
0
Views
349
Ozphonebloke
Ozphonebloke
Ozphonebloke
  • Locked
  • Question Question
MD110 Console issues
Replies
1
Views
431
Ozphonebloke
Ozphonebloke

Part and Inventory Search

Sponsor

Back
Top