Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MCK Extender 6000 PBX Gateway

Status
Not open for further replies.

Huffdaddy

Technical User
Mar 30, 2012
14
0
0
US
I have replace a bad MCK 6000 PBX Gateway, Norstar compatible with an ATA placed for the fax line. Since then we cannot fax. The faxes will answer and it will dial-out, but it acts like the data is not being understood. Is there a particular codac that it needs for its channel port. Not very familiar with the MCK's but do understand them. Any help would be appreciated. Thanks
Version of the new mck is a V2.1.6r3 and the one replaced was a 2.1.5r4.

Someday's your the bug and someday's your the windshield!
 
Not the worlds greatest MCKer, but my fax is working with
ADPCM32
path constant
tx attenuation 100
rx attenuation 80
jitter 75
packet size 4
line type 2

hope that helps
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top