Maybe a Cisco IOS Issue with 12.2??? Connecting TN2302AP's

[cduff]

Has anyone seen any issues with getting a network connection on a TN2302AP "Medpro" connected to a new Cisco 3750 P/E IOS-12.2? I am having problems getting 15-new circuit packs up on the network.

 

[ronfitz1]

Have you checked the speed/duplex settings on both Avaya and Cisco sides? 100/full both sides is recommended.

 

[cduff]

Yes all speeds set to 100/full. I'm sure it's a issue with the new Cisco 3750 P/E's IOS 12.2. Because our old Cisco 3550's work just fine.

 

[tbg247]

This is how my interface config looks for the Medpro:

interface FastEthernet3/29
switchport access vlan 3
service-policy output autoqos-voip-policy
speed 100
duplex full
qos trust dscp
auto qos voip trust
tx-queue 3
priority high
shape percent 33
spanning-tree portfast
end

Does this help at all?

 

[TheBoy83]

I am having problems with CLAN's, even though both sides are set 100Mb Full, they dont connect. If you set the switch to auto, then back to 100Mb Full it connects. Is this the problem you get?