Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Matrix 5000/Smartcell XR Blinking LED?

Status
Not open for further replies.

jjjax0330

IS-IT--Management
Aug 15, 2005
76
0
0
US
Hi, we just changed batteries in one of our APC Smartcell XR's and while the Matrix 5000 recognized it ok after we connected and reset it and says 2 battery packs installed and 0 bad packs, the led on the smartcell itself had been blinking for about 36 hours. Actually, both of our smartcells led's are blinking, even the one that we didn't change batteries. I was thinking that it was indicating that it was charging but it seems to be taking too long. Although we do have a big load, 77% on it, so maybe? I can't seem to find any help on what this means. I ran the battery tests fromt he Matrix 5000 and all are good. Thanks, Joe
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top