Making a Grid Editible

[fmoore0001]

Guys, another form I have to upgrade has a grid on it that is not editible (is that a word?). I have checked the grid settings and all are set to read-only false. However, the grid is connected to a table that is not the form primary table, but one of the SET RELATION files. Could this be causing the problem.

Frank

 

[Mike Lewis]

Frank,

I'm not sure about the SET RELATION issue. But have you checked that all the relevant properties are not read-only? The grid itself, the columns within the grid, and the controls within the column?

Mike


Mike Lewis
Edinburgh, Scotland

My Visual Foxpro web site:

http://www.ml-consult.demon.co.uk

My Crystal Reports web site:

http://www.ml-crystal.com

 

[fmoore0001]

Nope, did a check. All the Columns and text fields in the grid a NOT read only. And each has a control source set.

Frank

 

[Mike Gagnon]

fmoore0001

Do you get an error message or a message in the taskbar (at the bottom) saying "Control is read-only"? Is it possible that the table is read-only?

Mike Gagnon

If you want to get the best response to a question, please check out FAQ184-2483 first.