Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Make a single line phone ring this way

Status
Not open for further replies.

Jamser27

IS-IT--Management
May 22, 2013
1
US
I need to know how to make a single line phone ring until someone picks it up I don't want it to go to voicemail or a operator.
 
CLS = FND

if when you print TN you see FTR FDN xxxx - do the following to remove

req: chg
Type: 500
TN: <-- enter tn of phone to change
echg: yes
item: cls fnd
item: ftr xfdn

 
Remove HUNT and FDN values then in CLS = HTD, FND and FBD to be sure. If you have external hunt and forwarding set up, they will have to be cancelled too, but try this to start with.
 
When you say single line phone, are you talking about analog phones, or an M2006 digital phone for example?
 
HUNT, FDN, EHT, EFD to same Extn Nr ie to itself
Cheers!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top