Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Make a report wider than landscape

Status
Not open for further replies.

spayne

Programmer
Feb 13, 2001
157
US
I need to create a report that's about 14" wide. Is there any way to do this?
 
spayne

Never mind. Figured it out.

For the benefit of others you may want to share your solution here.


Mike Gagnon

If you want to get the best response to a question, please check out FAQ184-2483 first.
 
Here is the solution.

With the report open, select Page Setup from the File menu. From the Page Setup window select Print Setup. From here you can select the printer you want to send the report to as well as paper size and orientation, such as Legal Size and Landscape, which is what I used to create this report.

When the report is saved, these settings will be saved within the report.
 
Spayne,

as well as paper size and orientation, such as Legal Size and Landscape,

So what size are you choosing to get 14-inch paper? Presumably, your printer driver supports custom sizes and your printer is physically capable of printing such large sheets?

Mike


__________________________________
Mike Lewis (Edinburgh, Scotland)

My sites:
Visual FoxPro (www.ml-consult.demon.co.uk)
Crystal Reports (www.ml-crystal.com)
 
i think spayne figured out to use an 8.5" x 14" paper oriented as landscape.

kilroy [trooper]
philippines

"If the automobile had followed the same development cycle as the computer, a Rolls-Royce would today cost $100, get one million miles to the gallon, and explode once a year, killing everyone inside."
 
In the US, 8.5x14 paper is called "Legal" because it's widely used for legal documents.

Tamar
 
That's it. Nothing too complex. I suppose creating a custom-sized report would work as well.

SPayne
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top