Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Magix alarm question

Status
Not open for further replies.
papagigo1

papagigo1

Technical User
Joined
Apr 30, 2004
Messages
560
Location
US
On a Magix I had and alarm the said, "e911 overflow".
Does anyone know what that means?

Mike in NH
 
Sort by date Sort by votes
You E911 Partition either has no extensions in it....or no trunks in it, not a major issue. it just means someone dialed 911 at you facility and had to resort to the ARS table for X11. If you want to avaid the error in the furure, update you 911 Partition.

A.J. Wiesner
AT&D Communications
 
Upvote 0 Downvote
jinxs,

At that location they have been testing CID to enhanced 911, this must have caused the alarm.
What's involved to update the partition?

Mike
 
Upvote 0 Downvote
E911 under partitions look to see if your lines or pri channels are added , by default the stations are in
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Tim8582539
  • Question Question
Magix DSS4450
Replies
1
Views
192
TouchToneTommy
TouchToneTommy
Tim8582539
  • Question Question
Connecting a Magix DSS4450 to 4424LD+
Replies
1
Views
209
budbyrd
budbyrd
TrilokSingh
  • Locked
  • Question Question
MCK w/ Merlin Magix
Replies
1
Views
435
TouchToneTommy
TouchToneTommy
Jim E
  • Locked
  • Question Question
Merlin Magix and Merlin Legend DSS Console
Replies
5
Views
725
orion3311
orion3311
thephonelady
  • Locked
  • Question Question
Magix PRI down
Replies
3
Views
378
merlinman
merlinman

Part and Inventory Search

Sponsor

Back
Top