TheFanatic
MIS
I'm having difficulty writing to my CDRW. I get Mac Error= -50. After some searching I have come up dry... The machine is a converted G3 and the CDRW is an external Ricoh unit....Any help?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mac Error= -50
- Thread starter TheFanatic
- Start date
- Status
macgeneral
MIS
The error code you mention is:
-50 paramErr = Error in user parameter list
You won't find much in the way of direct help on the error code listing.
Tell us some more about your situation/system.
what OS are you running? Are you using iTunes, Toast or some other writing software? Is this burner a serial, USB, Firewire...?
This converted G3 has a sonnet processor hardware upgrade card? otherwise I'm confused by your "converted G3" statement.
Fill in some blanks and we'll galdly help. Between BuddingDesigner and I... no worries Mate.
-50 paramErr = Error in user parameter list
You won't find much in the way of direct help on the error code listing.
Tell us some more about your situation/system.
what OS are you running? Are you using iTunes, Toast or some other writing software? Is this burner a serial, USB, Firewire...?
This converted G3 has a sonnet processor hardware upgrade card? otherwise I'm confused by your "converted G3" statement.
Fill in some blanks and we'll galdly help. Between BuddingDesigner and I... no worries Mate.
- Status
Similar threads
- Locked
- Question