M3904 change ring to beep

[savvy101]

Hi Guys,

I've plugged in a headset on a M3904 and need to change the ringing option to just beep.

I know this isn't a phone option so how do I program this on the PBX?

TIA
Chris

 

[3tdp33ler]

Try CLS BUZZ

 

[savvy101]

I've entered in CLS BUZZ, didn't get any error messages but my phone still rings and doesn't beep

Any ideas?

 

[savvy101]

If this helps...
CLS TLD FBD WTA LPR PUA MTD FNA HTA ADD HFA GRLD CRPD STSD
MWA RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDA
CFTA SFA MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUA DPUA DNDD CFXA ARHA FITA CLTD ASCD
ABDD CFHD FICD NAID BUZZ AGRD MOAD
UDI RCC HBTA AHA IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRA ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
CPND_LANG ENG

 

[Nortellian]

you could try taking the handset off the cradle and making sure headset is plugged in headset port.

 

[savvy101]

When the handset is removed from the cradle, the phone buzzes.

Is it not possible to have the buzz when the phone is in the cradle?

 

[yyrkroon]

BUZZ is the default CLS, once you change it to RING, the only way to put it back is to out the phone and rebuild it...refert to the software feature guide...

 

[acewarlock]

BUZZ and RING is for when your on the phone and you want to have the phone RING on the second line and not BUZZ as default.

 

[savvy101]

So is it possible to make the phone beep and not ring at all?

I'm sure I had this before on an M3904 without the headset in.

 

[acewarlock]

In my 27 years I have never heard a phone BUZZ instead of RING unless I was on the phone already talking to someone.

 

[yyrkroon]

The Ringing instead of Buzzing feature, allows a digital telephone to ring
when a call is presented as follows:
• when the handset is off hook but the telephone is idle
• when the handset is off hook but the telephone is idle and when the user
is busy on another line
Ringing alerts a user in a more obvious way than buzzing (previous
operation).
If a call is presented to the telephone, it rings according to the Distinctive
Ringing Class of Service (DRG1, DRG2, DRG3, and DRG4), instead of
buzzing.

This feature does not affect the features where a buzz is already provided,
such as Ring Again or Manual Signaling.
Buzzing is the default configuration.


Short Buzz for Digital Telephones
The Ringing instead of Buzzing feature takes precedence over the Short Buzz
for Digital Telephones feature.

 

[savvy101]

Brilliant thanks guys!