M2250s on separate digital cards

[1911]

I'm not aware of any reason why you can't program four M2250s on four separate cards, with the remaining ports of each card programmed with digital sets. Would there be a problem with this configuration?

 

[RyanEOD]

My 2250's, be it only 2, are on different cards. Are you not able to program 4, or not able to program them on different cards?

 

[1911]

I'm not aware, but I have a customer that is having issues with programming features on these four cards after he has put the M2250s on the four separate cards. I was just checking. I have not ever heard of not being able to do this. Thanks

 

[MossEng]

I have a number of customers who have 4 or more M2250 spread across different Digital Line cards and they have no issues. I always thought this was standard practice so that a faulty digital line card doesn't take down more than 1 operators console.

 

[1911]

I too understood it to be this way as well, but wanted to confirm before I started digging into troubleshooting my customers problem. Thanks

 

[Firebird Scrambler]

Yep, I have customers with this. I've also configured many consoles in various ways such as 4 consoles on one card (Bad practice) and I think up to 8 consoles all on their own card on different IPE shelfs.

None of them caused any problems.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[terrysdavid]

I have two M2250s on one card and a third on a separate card and this have been working fine for years.