is there a wayt o make the 2250 console show a particualr Caller ID on outbound calls on a PRI? Currently the LEC has our billing number screwed up since we cut from Centranet loop starts lines to 2 PRI with DIDs. When my attendant calls out, they (temporary) billing number shows up instead of the DN that is assigned to the console. I tried adding a CLID entrynumber after the ATDN in LD 12 but no luck. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
M2250 CLID
- Thread starter cilcomm
- Start date
you'll need to contact the carrier. they have two choices, either show your transmited clid or enter one in the rdb for you.. you can go to ld 96 and enl msgo x (with x =to the dch) and make sure you are sending the desired clid
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question