Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

M2211 on a BCM400

Status
Not open for further replies.
1pzcomm

1pzcomm

Vendor
Joined
Nov 15, 2007
Messages
24
Location
US
Trying to get an M2211 wireless handset on line in a bcm400. Can not assign an ext and the handset says no GW once powered up
 
Sort by date Sort by votes
Do you have a 2245 controller conected to the network and configured properly? You have to have one for these sets. It acts as a proxy for all the wireless ip sets. Your 2211 will get its ip address, gatway and subnet mask from it, not the BCM directly.
 
Upvote 0 Downvote
Thanks Dog........ It looks like I will need a 2245..... was told yes, then no, now yes again....

Paul
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Nikos Koulioumbis
  • Locked
  • Question Question
BCM400 release 4.0 services
Replies
3
Views
527
Firebird Scrambler
Firebird Scrambler
cndr99
  • Locked
  • Question Question
BCM400 => Asterisk: no ringing near end ex BCM
Replies
10
Views
956
curlycord
curlycord
BCoo
  • Locked
  • Question Question
BCM 400 Take HD and Put into a different BCM400 can it be done? Keys?
Replies
15
Views
971
curlycord
curlycord
koulioumbis
  • Locked
  • Question Question
BCM400 Signalling Channels
Replies
4
Views
454
ucxguy
ucxguy
akak247
  • Locked
  • Question Question
RCC install on win 11- reporting for contact centre
Replies
2
Views
1K
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top