OK I have a s8300/G450 at the main. I have an s8300/G430 with the S8300LSP in slot v1 in slot v2 I have a mm710 and in slot v3 I have an mm714B. At the LSP site I can not get the MOH to work. I have it assigned to PORT 2 of the MM714 board. I know I have a good input into the port. I hear music on the RJ11 mod end. Heck I even pluged my tone generator into the port and still nothing. I went into my music souce screen shot:
change music-sources Page 1 of 7
MUSIC SOURCES
Source No. Type Source Description
1: none
2: none
3: none
4: none
5: music Type: group 1
6: none
7: none
8: none
9: none
10: none
11: none
12: none
13: none
14: none
15: none
I then went into my Change moh-analog group 1 Screen shot:
change moh-analog-group 1 Page 1 of 4
MOH GROUP 1
Group Name:
MOH SOURCE LOCATION
1: 16: 31: 46: 61:
2: 17: 32: 47: 62:
3: 18: 33: 48: 63:
4: 19: 34: 49: 64:
5: 005V302 20: 35: 50: 65:
6: 21: 36: 51: 66:
7: 22: 37: 52: 67:
And in my Tenant programing I have music source 5. My COR's are fine they are not restricted in any way. So if anyone can help me out that would be great..
Thank you in advance..
Stillyman