LSP translation corruption after upgrade to 2.2.2

[Spookytooth]

Hello all, was wondering if anyone has seen this before. Did an upgrade on an lsp from 2.2 to 2.2.2 last nite. All went well except I'm getting a corruption message on the login screen of the lsp when I log in via sat. File sync is working and the lsp is working as designed. I had this on another 2.2.2 upgrade six months ago and called Avaya about it. They told me not to worry about it if all was working ok. I was thinking it would be a little disconcerting to the cust if they ever happened to log in to it. Has anyone ran into this or know how to fix it?

Thanks

 

[GuzaPasha]

Yup i run into the same issue. The main server(ICC or ECC) must be running the 2.2.2 as all LSPs. Upgrade the main server and the corruption will disappear.

 

[Spookytooth]

Thanks for the response Guz. The other site i had this issue with 6 months ago was running 2.2.2 all the way around and I still had this issue.

 

[GuzaPasha]

Have a look at compatibility matrix, i upgraded 60 LSPs and all of them had the corruption untill the main server is upgraded to the same release and save translation si performed. Try to reboot the LSP ...

 

[Spookytooth]

6 months ago I rebooted the lsp's several time to no avail. I even tried doing a manual restore of an xln file I pulled over from the 8700 to see if that would do anything. I just dialed in to the switch from 6 months ago and still have the message on all the lsp's. 8700 and lsp's are all running 122.0 with same patch.