default password is sun1
recover password:
1. Stop all I/O going to the T3(s).
2. Connect a console cable from the master unit to a video terminal and
power off all units (both trays in a partner group).
3. Power up the master unit (leave alternate master off) and interrupt
the boot process by hitting RETURN when you see the following message:
"hit the RETURN key within X seconds to cancel..."
NOTE: If you leave the alternate master on, the T3 Operating System (OS)
will continue to boot. Eventually, the OS will assume there is a problem
with the master (that we interrupted), disable it, and make itself the
master.
4. At the "T300-EP" prompt, use the 'set passwd' command to view (and
memorize...) the password.
Regards
-- Franz
Sorry I'm not a native spaeker, I'm from Munich, Germany - "Home of the Whopper", oh no, "Home of the Oktoberfest" ;-)
Solaris System Manager; I used to work for Sun Microsystems Support (EMEA) for 5 years