Jan 25, 2015 #1 scanjet Technical User Joined Feb 24, 2004 Messages 231 Location US I do not have the install tape. Can I reset the admin password using a command line?
Jan 26, 2015 #2 Tacosoup Vendor Joined Apr 20, 2011 Messages 105 Location US I believe you need a same release install tape to default the admin password in you do not have the old password ** Proofread carefully to see if you any words out. Upvote 0 Downvote
I believe you need a same release install tape to default the admin password in you do not have the old password ** Proofread carefully to see if you any words out.
Jan 27, 2015 #3 Firebird Scrambler Systems Engineer Joined Apr 7, 2003 Messages 7,280 Location GB Mail 13 needed the install tape in order to change the Admin password. However all previous Mail versions can be reset via the command line. Firebird Scrambler Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK Advance knowledge on BCM support http://www.linkedin.com/in/davidbromley Upvote 0 Downvote
Mail 13 needed the install tape in order to change the Admin password. However all previous Mail versions can be reset via the command line. Firebird Scrambler Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK Advance knowledge on BCM support http://www.linkedin.com/in/davidbromley
Jan 27, 2015 Thread starter #4 scanjet Technical User Joined Feb 24, 2004 Messages 231 Location US I thank you both for your help. We found the password late yeterday. Upvote 0 Downvote