Loss Group Usage

[Hawkgromit]

Is there any way to determine which Loss Groups are being used by what resources within an Avaya CM2.2 system. Other than displaying the Analogue/Digital Station and Trunk Group settings?

I need to identify a "spare" Loss Group" for testing purposes.

J.D. Holmes
MCSA | ACA

 

[AvayaTier3]

http://www.aucommunity.com/showthread.php?t=17300&highlight=loss

        Loss    Direction
                Group   Port
Acronym Nmbr    Loss    Meaning
ONS             1       3       analog line with Off Premises=n
Dgst            2               DCP line
ICS             3               BRI line
OPS             4               analog line with Off Premises=y and R Balance=n
OPS_hi          5               analog line with Off Premises=y and R Balance=y
CO1             6       -3      Anl CO/DID/DIOD trunk with Term Bal=n and RA Trunk Loss=0
CO2             7       -3      Anl CO/DID/DIOD trunk with Term Bal=n and RA Trunk Loss=2
CO3             8       -3      Anl CO/DID/DIOD trunk with Term Bal=y
4W              9               Page & 4-w Tie incl TN437 with Conn Toll=n & STT Loss=norm
ATO             10              4 wire Tie except TN437 with Connect to Toll=y
DCO             11              Digital CO/DID
DTO             12              Digital Tie/PRI with Connect to Toll=Y
DTT             13              Digital Tie/PRI with Connect to Toll=n and STT Loss=norm and DTT to DCO=norm
DTTwats         14              Digital Tie/PRI with Connect to Toll=n and STT Loss=norm and DTT to DCO=low
sTT             15              Digital Tie/PRI and 4 wire Tie except TN437, Connect to Toll=n and STT Loss=low
2WTT1           16              TN439 with Connect to Toll=n
2WTT2           17              TN439 with Connect to Toll=y

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting

http://bshtele.com