Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
losing ILO-Pass
- Thread starter appi
- Start date
This may also help
Use the Security Override Feature on the ILO server to allow the use of the F8 ROM Based Setup for the ILO. Then reset the settings to the factory defaults. Do not forget to set a new Administrator's password.
Switch 1 on system board
Use the Security Override Feature on the ILO server to allow the use of the F8 ROM Based Setup for the ILO. Then reset the settings to the factory defaults. Do not forget to set a new Administrator's password.
Switch 1 on system board
Hi Appi.
Here's the solution.
You can deactivate the security on the iLO by finding the block of switches on the system board labeled SW1 near the PCI slots.
Place switch #1 in the ON position.
This will allow you to access it without a password. You can then reset your password.
Best Regards,
Nilesh Roy
{MCSE+I, MCSE, CCNP, CCNA, CIW Administrator}
(nilesh@nileshroy.com)
(+91 9811488301)
Here's the solution.
You can deactivate the security on the iLO by finding the block of switches on the system board labeled SW1 near the PCI slots.
Place switch #1 in the ON position.
This will allow you to access it without a password. You can then reset your password.
Best Regards,
Nilesh Roy
{MCSE+I, MCSE, CCNP, CCNA, CIW Administrator}
(nilesh@nileshroy.com)
(+91 9811488301)
- Status
Similar threads
