Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Loop Back Status 1720
- Thread starter fortage
- Start date
You can tell if the loopback is set. Do a "show interface"
you can see where is says loopback set.
Serial0/0 is down, line protocol is down
Hardware is PQUICC with Fractional T1 CSU/DSU
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, loopback set
Keepalive set (10 sec)
.
.
.
Hope this helps.
you can see where is says loopback set.
Serial0/0 is down, line protocol is down
Hardware is PQUICC with Fractional T1 CSU/DSU
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, loopback set
Keepalive set (10 sec)
.
.
.
Hope this helps.
- Status
Similar threads
- Locked
- Question