Locking 2950 1

[calskin]

Hello I am having trouble with my 2950-24. It logs through the post, but then wont go to the CLI. I am wondering if there is a way to reload the IOS into the switch and start from scratch. I'm only about half way through the CCNA study guide, so I'm pretty green when it comes to Cisco still. Any help would really be appreciated.

 

[rotaman]

Have you tried going into ronmon? Power cycle the switch with the "Mode" button pushed in. This should bring you to the ronmon. Once there, "flash_init", "load_helper", replace the config.text file and boot the switch. See if that does anything and get back to us.

 

[calskin]

Yes that worked, thanks so much.

 

[rotaman]

Excellent! It's good to hear