LOAD KEYB fails - am i being a noooob?

[nickitis]

Hi, I'm fairly new to Netware but something odd seems to be happening. Trying to use the "LOAD KEYB" command to set a new keyboard type, and get an "INIT FAIL". Is there any way i can get more info on the error from Netware 6? Am i missing a component, or typing the wrong stuff? I've tried "LOAD KEYB UNITED KINGDOM" too.

Thanks, Nick

PS sorry for posting this originally in the netware 5 forum

 

[Provogeek]

Well, you seem to have it right.

When you just type in KEYB.NLM, then it will fail to load because you need to specify they keyboad mapping type.

By typing in LOAD KEYB UNITED KINGDOM it should set it (note: will only load once). What is the exact error message you get when you type it in this way?

Here is the documentation on the command.

http://www.novell.com/documentation...mentation/lg/nw6p/utlrfenu/data/hv7lr8sz.html

=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
Provogeek
CNE Network+ Experience

Certified nut case

 

[nickitis]

Thanks, just noticed the console output, this might shed some light:-

----------------------------------
Loading module KEYB.NLM
NetWare National Keyboard Support
Version 2.10 July 26, 2001
Copyright 2001 Novell, Inc. All rights reserved.

Keyboard support for United Kingdom, code page 437 loaded

Unable to register keyboard handler
SERVER-5.60-1553: Module Initialization failed.
Module KEYB.NLM NOT loaded
Module KEYB.NLM load status INIT FAIL
-----------------------------------

That's the lot!