linking buttons to external or cell #s 2

[jlong515]

On an 8434D model phone I have set several of the buttons to dial internal extensions using the ind-busy (ext #), but what command allows you to dial an external phone #, a cell #, or an international #. I am kind of new at configuring Definity's and any help would be greatly appreciated. JL

 

[mikeydidit]

One easy way is to program autodial buttons. Type in 9xxxxxxx. Should go through with no problems. If you find any mistakes, please consider that they are there for a purpose. And everyone needs a purpose.
Hope this helps, Mikey.

 

[keithmyers]

There are three abbreviated-dialing lists. System, Group and Personal. The commands to edit these lists are:

change abbreviated-dialing system
change abbreviated-dialing group <GROUP#>
change abbreviated-dialing personal <EXTENSION>

Once you have telephone numbers in the list(s), change the station and on page two indicate which of the above lists will be 1, 2 and 3. You can then program a feature buton for abrv-dial List X DC X. The DC (dial-code) is the same dial-code that is on the list that you created above.

-Keith-

 

[jlong515]

Thanks Mike and Keith for your help...really appreciate it. JL