Lines / Extentions

[nra2857]

I was wondering how it is possible for me to get a list of lines and their associated extentions. Any help would be appreciated. Thanks!

 

[mroberts]

Lines are assigned to extensions. They are not automatically associated. MRoberts
mroberts@americaii.com

http://www.a1teletronics.com

 

[nra2857]

Yes. However is there a way to see what is assigned to what?

 

[rookie10]

On a M7310, press Feature ** 266344, pswd: 266344. Press next until you see Maintenance, press show once, press next until you see ports and dn, press show. Enter the port number starting at 0101 or 101 depending on the software level.

 

[Arr]

nra,
MRoberts is trying to explain that the lines are programmed to phones. That all buttons are 'soft'. Maintenance will only show you what kind of phone is attached to which connection at the KSU. ie 221 is at port 0101. Or if you follow the FAQ in this forum you will see that port 0101 is pair 1 white/blue blue/white on the set wiring distribution.
Failing that I am reading your point, check each phone using F*0 and press a button the horizontal display screen will tell you how that button is programmed regardless of its label.
Or You can see all with Norstar Remote Utilities if you have a KSU of Rls 2.0 and up of the ICS series.

Does this help?

PhM