Line side T1 card??? 1

[srmega41]

Does Avaya make a line side T1 card? Something that would allow mw to configure analog ports, and then use a T1 to transmit the signal? I have installed these on Nortel PBX's many times over, usually connecting to a third party appliance, like an IVR.

Any ideas or suggestions would be very helpful. I would like to avoid having to put a channel bank in on both sides of this T1.

Scott M.

 

[4merAvaya]

Any of the Avaya DS-1 boards, TN722B, TN767, TN464, or TN2313, can be used for a line side T-1. On the station form use 'DS1FD' as the set type. Program the DS-1 board as robbed-bit.

Kevin

 

[srmega41]

That is great news!! I have a TN767E in place now, so that is easy.

Thanks a ton!!

Scott M.