Legato problem to recognize the CDL .... Error with the inquire comman

[ChickBladder]

I have a CDL700 ....
I installed on a first server Legato Networker 7.2 ... this server has 3 hba cards .... 2 connected to a DMX and one connected to the CDL ... I configured
for this server a VTL Adic Scalar i2k and 5 drives IBM LTO2 ... this VTL is showed through the port 1 of the CDL ... I configured a correct zoning and
all is working fine
I installed on a second server , the same Legato Networker 7.2 ... this server has 6 hba cards .... 4 connected to the DMX and 2 to the CDL .... I configured
for this server another VTL Adic Scalar i2k and 10 drives IBM LTO2 ... this VTL and the first 5 drives are showed through the port 3 of the CDL and the last 5 drives
through the port 7 ... I configured a correct zoning and so the server see the media changer and the first 5 drives on the 5th hba and the last 5 drives on the
6th hba ..... all is ok at the OS level and with this configuration, the inquire command give back an error ... I don't see the VTL and the 10 drives ....
each time that I launch the inquire command even with -l , i see in the event viewer of this server an error :

"Faulting application inquire.exe, version 7.2.0.0,faulting module libscsi.dll,....

Thanks for any assistance!

 

[605]

It lloks that somethin is wrong with the libscsi.dll. Dis you try to install from another source or even another version?