ldk20 isdn setup

[lancselec]

Hi i have an ldk 20 system which we have just downgraded from four isdn channels down to two. when we access outside line dial 9 it goes to line 4 which has been disconnected how do i re-programme it to see only the two lines

 

[Smilin229]

try main menu 3 sub menu 3
press digits 34 to select lines 3 and 4
press flex button 3 to enter co line group assignment
press digit 4 to select group 4
[hold/save] to save change

 

[Smilin229]

wait a sec thats for gdk-20. my tired eyes sorry

 

[doktor]

This is right, smiling229 - for the GDK-20W.

In ipLDK-20 use PGM141 and enter the lines 3+4.
Set these to belong to CO group 9, which diables the CO lines.
Press [Hold/Save] to save the changes permanently.

///doktor