ldk 24 lovk keys

[Chamvari]

Hi

Can someone send me commands of how to enter lock keys for ldk 24 version 1. I only know how to check them through telnet but to enter new ones i don't know ,i have gone this far and i am stuck:
1. Connect to LDK-24 (telnet)
2. Apply ‘admin’ and ‘admin’ for login name and password.
3. Type "c e" and enter
4. Type "call" and enter
5. Type "mnt q d" and enter for displaying the serial number.


Dial Tone shoul be There

 

[Smilin229]

Just had a quick look online and i found this command

q w x (lock_key)

where x is a number.

The page I found this on was a pdf at

http://www.proftelecom.by/files/Lock-Key.pdf

Hope this helps
James

 

[Smilin229]

sorry should be

mnt q w x (lock_key)

Where x is a number (refer to pdf)

 

[doktor]

Dear All

I added some good extra information...

1. Connect to LDK-24 (telnet)
2. Apply 'admin' and 'admin' for login name and password.
3. Type "c e" and enter OR "co e" if the version is 3.0/3.7
4. Type "call" and enter
5. Type "mnt q d" and enter for displaying the serial number.
6. Write the lock key data "mnt q w X (lock_key_number), where X is the type of lock key.

Lock key type 2 = TAPI
Lock key type 5 = Networking
Lock key type 6 = PC Phone (ezPhone)
Lock key type 8 = TAPI 1st Party

///doktor