Ld 17

[dannoWI]

Old rls24 books say INI needed when changing Parms in ld 17. Release 3.0 books do not mention INI. Has this changed?
Specifically need to change CSQI/CSQO.

 

[johnpoole]

what in parms are you changing? some params (buffers) still need an ini, after a edd. another thing, param doesn't load on ini, if the check sum matches. for ld 17 adan's you can dis msdl and enl msdl x fdl, so you don't need an ini... buffers, i still schedule an ini

john poole
bellsouth business
columbia,sc

 

[ewaver]

...just a reminder...INI doesn't affect established calls...but transient states are affected like dialing because the call registers (temporary call data) are wiped, & network cards support existing calls via their onboard memory....

 

[janaya]

and remember, it's easier to ask for forgiveness than permission.........

just do it.

 

[johnpoole]

if your concerned about calls in progress, don't ini. no the calls will not drop, unless they are on hold conf or in the middle of a transfer. an ini under high traffic could cause a restart, that does drop calls. if you don't ask permission and the switch goes down, just make sure your in the switchroom alone.. i did an edd on a working 71, it ini'ed went down and stayed that way for 6 hours... just a bad monday in the middle of a week

john poole
bellsouth business
columbia,sc

 

[ewaver]

..john...one pre-cutover afternoon, someone onsite, INI'd the switch during an EDD ! - well - fortunately we had a backup tape - as you prob. know the tape data gets corrupted & the tape didn't loadin that case....

 

[vztech]

janaya

Thats good !!! LOL