LCKO CH on a LOOP 1

[is2telecomm]

I have a channel locked out on one of our loops. In LD 60 what is the command to re-enable that channel? Do I need to disable the channel first?

 

[Nortellian]

dsch x y
ench x y
x= loop
y= channel

 

[MG2005]

and if that doesnt work, which is often, you may need to disable and re-enable the entire loop (DISL X and ENLL X the entire loop to clear it

if its a PRI you would first have to disable the D-Channel in LD 96

 

[PERRYPJ]

AND IF THAT DOESN'T WORK GIVE IT TO TELCO

OLD ROLMEN WORKING ON NORTELS

 

[johnpoole]

disi xx

will disable the t1 when all channels are idle. if it's a pri

ld 96
dis dch x auto, will do the same thing, or then go to 60 and disl x the loop.. on a pri, the d has to go down 1st but it comes up after the enll command in 60

john poole
bellsouth business
columbia,sc

 

[is2telecomm]

As always, thanks for all of the help.