!!!!!!!!!!!!!!!LATINASinc.com NEEDS YOUR HELP!!!!!!!!!!!!!!!!!

[freddyboy]

Here's the problem.&nbsp;&nbsp;We are trying to build an interface.&nbsp;&nbsp;The face is a single jpg but in order to make the interface to work we need to subdivide it.&nbsp;&nbsp;Now we have broken that single jpg into smaller pieces and placed those pieces into a table.&nbsp;&nbsp;The goal is to make this interface look like a single image but when placed in the table the pieces are seperated by spaces created by the table.&nbsp;&nbsp;We know this can be done because we have seen it done by other sites.&nbsp;&nbsp;For example quepasa.com is a site that comes to mind it was built this way (in tables) and looks like a single image when in reality its not. Any help would be greatly appreciated.<br><br>Thanks In Advanced

 

[azhdeem]

A couple of suggestions,<br>1. Make sure that when you cut up the picture, that the smaller pictures which will be in the same rows and columns are of equal height and/or width. Overlaying the jpeg with a grid outline that you can hide after you make your cut helps out with this.<br><br>2.When you create the table check to make sure that you have done so without any cell spacing, padding or borders.<br><br>Hope this helps.<br><br>

 

[freddyboy]

Thanks, just got a chance to work with your suggestion. Your suggestion worked! Thanks!!!!