LANU is reseting MPBE

[yogich]

Hello.

I'm new here... Can't find the answer surfing the Web...
Here is the history.

I have decided to upgrade my 5-6 years old ipLDK-100.

I got new MPBE (rev.1.6 N1104) and new PMUE (IPLDK-100 ASMU2N GS90p-3. 9E).

The old one was the followig - MPBE (rev.1.9 C0503) + PMUE (LDK-100 PMU2E GS-90P 2.21) + LDK-100 LANU (rev.1.5 N0504, SPGY0017703-1 0) + PLLU (N0407, SPGY0017101-1.0).

When I try to install old LANU (rev.1.5 N0504, SPGY0017703-1 0) on new board the system is starting to reseting itself... When I remove LANU everything is OK, no reseting...

What a problem can be? I look from list this LANU is compatible...

 

[doktor]

LAN address for the ipLDK is 10.0.0.3 for ISDN connection, right"
-> Sorry, no I have given you wrong info here.

With ipLDK you dial through the ISDN and the ipLDK PC ADMIN takes care of logging in etc.

With iPECS and ipLDK-24 you dial in through the ISDN by means of the "old" type of internet connection through ISDN, and after the ISDN data connection has been made you browse to the ip address 10.0.0.3. BUT only with LG products having their own web server like iPECS and ipLDK-24 (nexer).

So you do not have to worry about ip addresses when using ipLDK-100/300, when dialling through the ISDN.

The ip address "10.0.0.3" is not changeable in these products.

///doktor

http://www.kandu.dk/spg153996.aspx