Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LAN to LAN VPN with PIX501

Status
Not open for further replies.

frenchpeter

IS-IT--Management
Sep 10, 2002
44
FR
We have a PIX 501 which works well with Cisco VPN client from a couple of VPN clients. One client accesses the Internet via a Vigor 2600 ADSL router and the other with a Vigor 2800 ADSL router. Neither of the routers is on a fixed IP address.

We wish to set up at least one of these clients with a LAN to LAN VPN set up in the router so that more than one computer can be used through that router for VPN. As far as I can see via the PDM, the PIX is only set up for Cisco VPN client access.

How do I configure the PIX to accommodate the LAN to LAN connection? Please bear in mind that I can follow the necessary steps in any setup via the PDM but that is the extent of my knowledge!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top