Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

KVM Moniter switching problem with IMK model

Status
Not open for further replies.
JasonDBurke

JasonDBurke

Programmer
Jun 20, 2001
54
US
I have two short 1U boxes connected on an internal network and the instructions on how to toggle between machines with the moniter are either wrong or I am completely out of my mind (strong possibility). Anyway...if anyone knows the solution to this deal let me know.
Jason
 
Sort by date Sort by votes
Don't understand the problem. You haven't told the whole story.
KVM switches generally are powered through the keyboard connections or by external power connected through a keyboard connection.
Each processor should be connected with 3 connectors to the KVM switch and the keyboard,mouse, and monitor should be connectd to the common area of the KVM switch. Ed Fair
efair@atlnet.com

Any advice I give is my best judgement based on my interpretation of the facts you supply.

Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.

 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top