I have a MICS 6.0 and I am trying to add 2 caps to a m7324. Only the first cap works, the middle 1 is dead. My jacks are wired 568b with a 4-pair. m7324 on the blue. power for the middle cap should be on the orange. Power for the other cap should be on the green. Both power feeds are good and both caps are ok. I am going crazy. PLEAE HELP!!!!!!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
KLM 2
- Thread starter techwill
- Start date
-
1
- #2
Well first you have to tell the system that you are using two cap moduals. Then to wire up the jack, you must have power going to the proper pairs. And last, you must use a 6 conductor line cord. Now if i'm correct, a 6 conductor line cord will not pick up the white orange power pair on an 8 pin jack. you will be getting power from the white green pair to your first cap, but you will have to change the power for the 2nd cap to pins 2 and 7 of the 8 pin jack, i think it's the orange/white conductor and the white/brown conductor. I am typing off the top of my head, so i may be off on something.
But this should put you in the right direction.
Gabriel
But this should put you in the right direction.
Gabriel
-
1
- #3
Galfaro is correct on his colors. Since a 568B is wired to a different standard than a USOC RJ-11.
568B contacts
1 W/O
2 O/W +24V
3 W/G +24V
4 B/W T--------------------
5 W/B R--------------------
6 G/W -24V
7 W/BR -24V
8 BR/W
You don't have to tell the system that you are using KLM's unless you are actually putting LINES on them.
MarvO said it
568B contacts
1 W/O
2 O/W +24V
3 W/G +24V
4 B/W T--------------------
5 W/B R--------------------
6 G/W -24V
7 W/BR -24V
8 BR/W
You don't have to tell the system that you are using KLM's unless you are actually putting LINES on them.
MarvO said it
- Thread starter
- #4
- Thread starter
- #5
Techwill,
It's rewarding when you know that you have helped someone.
We all really appreciate it when you respond back like you did to let us know that the problem is fixed. That is what keeps the answers coming. Enjoy your weekend, and make that beer a Coors Light if you can.
MarvO said it
It's rewarding when you know that you have helped someone.
We all really appreciate it when you respond back like you did to let us know that the problem is fixed. That is what keeps the answers coming. Enjoy your weekend, and make that beer a Coors Light if you can.
MarvO said it
- Status