Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Kilowatt hours used on Callmaster 3 & 4

Status
Not open for further replies.

Timbo50

Instructor
Nov 12, 2004
56
GB
Question:-
Does anyone have anyidea of the Kilowatts per hour used by the Callmaster 3,4 &5 please Is it more than a 9608IP cant find any thing on this

Thanks all
 
CallMaster sets get their power from the digital circuit packs that hey are connected to in the PBX. There is no external power required. 9608 and other IP phones require that power be provided from a local power unit, a mid-span power unit, or a LAN switch capable of providing Power-Over-Ethernet (POE).

Kevin
 
Kevin

Thanks for that but we are trying to put a cost to our board to say why putting IP phones in would be more economical for the business we know what KWh the IP phones run at we were hoping Digial phones were higher thus more cost if that makes sense
 
As a general comment, digital sets consume less power to operate than an IP phone.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top