Key mapping F5 for MMail with hyperterm? 3

[cc75959]

I need to map F5 to ^[[21~ for hyperterminal. Is this possible? And how?

 

[senk1s]

i dont know how to do this ..but F5 on meridian mail is the "Enter key in the number pad"

post it if you figure out how to do the mapping

 

[cc75959]

senk1s,
in hyperterminal, What are your settings for emulation? Mine was at vt100 and enter from the keypad still did not work.

 

[PERRYPJ]

DON'T BELIEVE THERE IS ANY MAPPING ON HYPER

OLD ROLMEN WORKING ON NORTELS

 

[senk1s]

i use vt100 or att4410 ... dont remember which one i tried the enter key.

 

[hawks]

I have found that for whatever reason on some keyboards the Enter key does not work also.

 

[johnpoole]

^[OP is the map needed for f5 in hyperterm.. do youself a favor, get a copy of procomm.. very good software for this app.. hyperterm was to light even back when it was the best windows 3.1 could do..

john poole
bellsouth business
columbia,sc

 

[one234]

Hi,

Set your emulation to VT-100 and try F10 (The Key)


Marc D.

If Bill Gates had a nickel for every time Windows crashed... Oh wait, he does...

 

[PAULNOTTRACEY]

This works for me.

Ensure Caps lock is on
Press ESC o and m at the same time.

 

[ArchTelecom]

I am pretty sure the maker of hyperterminal later came out with a "Private Edition" upgrade that included soft key which would be user definable. Take a look at

http://www.hilgraeve.com

and see if this addresses your needs.

 

[PEMpal]

Yes, Hilgraeve has a Private Edition.
And here's how to get [F5] to work, after you have PE installed:
1. Menu {View}{Key Macros}
2. Button [New]
3. In the 'Key' field, just press the F5 key on your keyboard. <F5> will appear in the box.
4. In the 'Action' field, (THIS IS IMPORTANT!!)
Press the Ins key on your keyboard
Press the Esc key on your keyboard. <ESC> will appear
Type [21~ ...... left bracket, two, one, tilde
You should now have <ESC>[21~ in the Action box
5. Button [OK][OK]
6. {File}{Save} or {SaveAs}

 

[GringoMcC]

I realise that this is rather an old post but, I've just corrected this problem using a *FREE* solution, so I thought I'd post it.

I used Tera Term Pro v2.2 by T. Teranishi and created a new keyboard mapping which swaps the F1 - F5 keys with F6 - F10.

If any one is interested, I can send them the config file and keyboard file?