Juniper EX2200

[Shortcode]

I am setting up IP500V2 6.0 with Juniper EX2200 POE switches. I want to set up two vlans, voice and data. I am familiar with other switches, has anyone set this up before? What are some quick pointers for VLAN setups and passing DHCP to Windows DHCP server?

Thanks!

 

[intrigrant]

Go here:

http://www.tek-tips.com/threadminder.cfm?pid=1616

 

[Shortcode]

Yeah, I went through all 3 pages in the Juniper forum earlier today. Even the newest thread from June 10. Well, there seems to be no information on what I am asking for, and I believe someone here would probably know, in this more active forum. Sooooo. I really only need to know how to turn on DHCP helper, or the Juniper equivalent, to send my requests on the avaya VLAN to a seperate DHCP service on the Windows DHCP server, which is already programmed with the Site Specific information on the default DHCP service and the new service.
Thanks.

 

[Bas1234]

Try to look for RFC2131 or DHCP relay.

http://www.juniper.net/techpubs/software/erx/junose52/swconfig-broadband/html/b-ras-config13.html

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[JayNEC]

for starters:
"set forwarding-options helpers bootp"

here's the full context:
set forwarding-options helpers bootp interface vlan.2 server 10.0.1.2
for example

 

[JayNEC]

and, here:

http://www.juniper.net/techpubs/en_US/junos10.2/topics/concept/dhcp-relay-overview.html