Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Jumpstart Problem "Panic"

Status
Not open for further replies.

stevenriz

IS-IT--Management
May 21, 2001
1,069
Hello again. Trying to jumpstart another server and getting this messge

Executing last command: boot net
Boot device: /pci@1f,0/pci@1,1/network@1,1 File and args:
2aa00 panic - boot: Could not mount filesystem.

Program terminated
ok

I have the proper requisites complete. ethers file has the proper MAC address, cdrom on the jumpstart machine is shared, hosts file on the jumpstart machine has proper entry and IP address we would like. Both machines are on the same subnet. While booted, we can log into one from the other and vice versa. We can also share directories back and forth as well. Don't know what else to look at!! I have done this a humdred times without problems. There is always a first time for everything I guess!! Thanks.
 
Ironically the name on this server is "neo". My coworker told me "It's only a spoon" so I bent it.

I had the "share" incorrect on the jump machine. I did a regular share /cdrom instead of the following which works a little better.

share -F nfs -o ro,anon=0 /cdrom/sol_8_701_sparc/s0

Thanks!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top