In element manager on a CS1000M 4.5 system, when trying to connect a new 1120e set, I was looking at the logs and I have numerous errors such as this below:
<b>NOV 25 12:45:14 TPS: Error ITS2005 Terminal's node ID/TN configuration is corrupted: 10.0.60.35 18001bbaf76e516624 (42)</b>
ITS2005 reads
ITS2005 Terminal’s node ID/TN configuration is corrupted: <terminalIP> <terminalHWID>.
Action: 1. Alarm may indicate random occurrence that is not service impacting; note occurrence time and date for further follow-up. If any service-impacting problems occur at the same time, further analysis is required immediately. 2. If alarm persists, log into device and capture maintenance report log (if possible) and send the text to Nortel support staff via email. Follow any steps described
above for the specific alarm.
Severity: Major. Critical to Monitor: No. SNMP trap: No
<b>NOV 25 12:45:14 TPS: Error ITS2005 Terminal's node ID/TN configuration is corrupted: 10.0.60.35 18001bbaf76e516624 (42)</b>
ITS2005 reads
ITS2005 Terminal’s node ID/TN configuration is corrupted: <terminalIP> <terminalHWID>.
Action: 1. Alarm may indicate random occurrence that is not service impacting; note occurrence time and date for further follow-up. If any service-impacting problems occur at the same time, further analysis is required immediately. 2. If alarm persists, log into device and capture maintenance report log (if possible) and send the text to Nortel support staff via email. Follow any steps described
above for the specific alarm.
Severity: Major. Critical to Monitor: No. SNMP trap: No