ITG Card User name/Password

[clayndwoods]

Does anyone have the vxWorks user name and password for the ITG card handy? I can't find my notes, and they sent me one without the flashcard. I have the ITG Line 3.x software loaded on a flashcard but I need to use the operating system to get it in the right directory so I can start setting it up in OTM.

 

[clayndwoods]

I found it.

 

[johnpoole]

great, post it for us mortals, thanks

john poole
bellsouth business
columbia,sc

 

[clayndwoods]

I can post the command set also, but it's available once you boot the card. Hook up to the ITG card with a serial port and reboot it. I forget what it says to do to enter the vxWorks operating system underlying the shell (the default shell user and password are something like itgadmin itgadmin or some derivitive thereof), so you may have to boot it twice to see the keyboard input to exit to vxWorks. The user name is case sensitive windRiver and password is developer.

 

[dlesap]

Don't need to boot the board.
Enter itgadmin as login, itgadmin as password, then vxWorksShell command at the prompt and finally windRiver as login and developer as password.

 

[clayndwoods]

That works if your board has the shell loaded. Mine doesn't. Someone forgot to include the internal flashcard in the kit when it was shipped. It sat on the shelf for almost a year, and now I'm going to replace the old 24 port board with it.

 

[vztech]

FYI- with 3.0 succession ITG defaults to your login and password of switch.


-vz

 

[clayndwoods]

I have become aware that the shell does, but does vxWorks also?

 

[janaya]

no the shell is the switch logins, but vxWorks uses the above posted login and password.

John