ISDN 2 ddi numbers

[frankieg]

Hi ALl
I need to get incoming DDI numbers routed to an ISDN2 (TN556D)WCBRI, and i just cant seem to get the actual number passed onto the rightfax server, all that comes up is the WCBRI data module number.
Any ideas

TIA

 

[Zen216]

how is it setup now? what is getting passed?
we don't use WCBRI module, but we do use RIghtFax, ds1 in the pbx to a brooktrout board in the rightfax server..
see my post in thread690-1398198
don't know if the config info will help or not..

 

[frankieg]

Hi

I Have a data module set up that is port 1 on my TN 556D card, then I have tried the incoming trunk group to intercept the DDi numbers and insert the data module no, no joy, I have made the DDI extn that goto a cov path with a hunt group that has the data mod in it, No joy, all i seem to get on the Right fax is the number of the data module all the time. I cant use a DS! as i only have a isdn 2 conne ction in the rightfax.
Thanks

 

[Zen216]

I've never used that card before, so I do not think I can really help you that much.... can you setup a trunk with the port from the TN556 card? if so, then you can use udp/aar to route the call to it, (see my post in the thread mentioned earlier)
If not, and you can only setup as a station, then I am sorry, I don't know how you would pass the info to the fax server....