Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Is my Power Supply Adequate?
- Thread starter JonathanB
- Start date
250 is the minimum I would try with that, with all those fans you may want to get a better one. also some cdrw burners are picky with calibrations if you have lower end power supplies and lots of stuff...
but one thing is if it works then it works...
but one thing is if it works then it works...
Boy you must be clocking big time to need all of those fans?
I know it's a rather crude test but can you hear any differance in fan tone as the machine starts to work? (when loading programs,or CDrom starts spinning)
This is a rough indicator that the PSU is nearing it's load limit.
Also bombing out! another obvious indicator. Martin
Just trying to help, sometimes falling short, I am only human after all.
I know it's a rather crude test but can you hear any differance in fan tone as the machine starts to work? (when loading programs,or CDrom starts spinning)
This is a rough indicator that the PSU is nearing it's load limit.
Also bombing out! another obvious indicator. Martin
Just trying to help, sometimes falling short, I am only human after all.
- Thread starter
- #5
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
